ACES INVENSYS TECHNOLOGIES LLP
Nerul, Navi Mumbai, Thane, Maharashtra
GST No. 27ABPFA3323A1ZV
08048265596 92% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Data Logger For Temperature Measurement
Taguard Real Time Probe Based Data logger is a ideal product to be used for monitoring concrete curing
What Temperature Should Be Maintained?
At the batch plant, concrete should be kept at 45 to 70 degrees, with the higher end of that range required for thinner concrete pours and colder outside air conditions. Lower temperatures in that range are acceptable at the plant if the air temperature is less severe and if the pour will be thicker. Upon pouring and throughout curing, the concrete must be kept at 40 degrees if more than 72 inches thick, 45 degrees if 36 to 72 inches thick, 50 degrees if 12 to 36 inches thick, or 55 degrees if less than 12 inches.
Here are a few more temperature tips that should guide any cold-weather concrete work:
The surface, edges, and corners of the poured concrete are the most susceptible to cold and the most critical to protect.
Rebar of No. 18 and smaller can be less than 32 degrees upon installation. So can formwork and steel I-beam and other embedments smaller than 4 inches square.
However, surfaces in contact with the fresh concrete must be free of ice, snow, and frost, and concrete must not be placed on frozen subgrade. Hydronic (water or steam) heating tubes can be placed directly on the subgrade or on top of insulating blankets placed on the subgrade to thaw the subgrade before the pour.
How Do You Protect Concrete From Severe Temperatures?
Here are the best protection methods to insulate curing concrete from cold ambient air:
Because concrete throws off heat during the chemical reactions of curing, insulated blankets and insulated formwork can be sufficient to maintain proper curing temperatures. They must be secured so that wind cannot blow them off. It is also important not to trigger thermal stress through overheating resulting from overinsulation.
Strong, weather-proof, heated enclosures protect concrete within buildings, but curing membrane or additional water may be needed to prevent the surface from drying due to the use of heaters.
Monitoring Temperature Is Challenging but Taguard wireless data logger makes it easily to reach thr toughfest corners of the buildings .
| Usage/Application | Concrete Temperature |
| Parameter To Be Monitored | Rh and Temperature |
| Type Of Data Logger | Wireless |
Precise temperature & humidity realtime monitoring
Ultra-low power consumption chipset
Support iBeacon, Eddystone advertisements simultaneously
Firmware update Over The Air (OTA)
Logo and color customizable
Provided with your own configuration
100% Configurable Parameters via app (Android & iOS) & gateway
DOWNLOADAdditional Motion sensors available
Compatible with iBeacon and Eddystone (UID, URL, TLM) at the same time.
All the parameters of this product can be modified via configure APP.
The K6 temperature and humidity beacon can monitor and track the pharmacy logistic, warehouse and etc, and provide full monitoring and control for the whole environment.
The K6 beacon can also work with our KGateway (with LTE&GPS), providing real-time temperature monitoring and location tracking in the food supply chain, cold chain transportation, drug logistics.
| Brand | Taguard |
| Model | Cold Storage |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Usage/Application | IOT |
| Power | POE |
| Brand | 2.4 BLE |
| Color | White |
| Frequency Range | BLE |
KG01 Outdoor Bluetooth Gateway is a Bluetooth 5.0 low energy (BLE) to 3G/4G cellular/Wi-Fi/Ethernet connectivity beacon gateway without using smartphones or apps. The KG01 beacon gateway collects the data from iBeacon, Eddystone, BLE sensor or other BLE devices, and upload data to the local or remote cloud server by MQTT/HTTPS protocol over 3G/4G, ethernet, Wi-Fi or WiFI hopping. And it also support update the KKM beacons pareameter remotely.
KG01 Outdoor BLE Gateway comes with smart design, designed to work outdoor.
KG01 Outdoor IoT Bluetooth Gateway supports Bluetooth 5.0 LE Coded PHY long range.
KG01 Outdoor Beacon Gateway provides offline storage, it prevent data packet lost due to the network disconnection.
KG01 IoT BLE gateway also provide convenient operation & maintanence tools. The user is easy to configure the KG01 Bluetooth gateway | Beacon Gateway via a web/phone UI, and it support remote configuration.
WHAT YOU CAN DO WITH OUR GATEWAYMODERN LOGISTICS
Real-time inventory management
Goods check-in/out automative
In warehouse navigation for staff
SMART BUILDING
Space Optimization
Control Access
Employee Safety, Social Distancing
Contact Tracing, Quarantine Monitoring
AUTOMATED INDUSTRY
Geo Smart Factory
Factory Optimization
Real-time production management
Maximize work efficiency
SAFETY & SECURITY
Employee safety, Anti-collision forklift
Emergency button & alarm
Real time Access control
Hazardous area access
SMART HEALTH CARE
Employee and patient safety
Tracking medical equipment and assets
Optimized hospital workflow
FEATURES
Support 3G/4G, WiFi, Ethernet
Bluetooth Low Energy 5.0 PHY code long range Bluetooth gateway
Ultra-low power consumption chipset ARM series
Firmware update Over The Air (OTA)
Logo and color customizable (MOQ)
Provided with your own configuration (MOQ 50 unit)
Easy to config web & phone UI
Features of the BLE Gateway
Water proof-IP54/Sun proof
BLE5.0 Long distance Feature
BLE distance: BLE5.0 Coded PHY mode up to 300 meters in open space
Open protocol: Local server or HTTPS/MQTT to cloud
WiFI WPA2, 802.1x Enterprise
Bi-directional: reads advertisement data and sends command(update beacon parameters from cloud)
Configuration: Web portal and phone protal
Transmit: ETH/Wifi/Wifi-hopping or usb extend(3G/4G module)
Power: 5V DC or ETH PoE(802.3af)
Base on latest OpenWrt 18.29
BLE chip: nRF528xx serie
With 3dBi flexible FPC antenna
Up to 150 Mbps PHY data rate
Built-in RTC and NTP support
1T1R 2.4GHz frequency band
IEEE 802.11b/g/n
Supports 802.3af PoE standard
Supports firmware upgrade Over-the-Air
Supports remote configuration
POE status LED indicator
Data usage monitoring